Large Shed Being Delivered? We'll Handle the Build From Survey to Finish in Solihull

Big sheds reward proper planning and punish shortcuts. A workshop-size building weighs more, carries more wind load, needs a better foundation and takes longer to build — and mistakes made early, on the base or the frame, are expensive to unwind once the roof is on. That's why we treat large shed installation as a quoted project with a survey first.

Why large installations need a survey

Size changes everything. A large building needs a base designed for its footprint and load, not just any flat patch; access routes need checking for panel lengths, timber sections and getting materials to the site; overhead obstructions, slopes and tight corners all matter. Ground conditions decide whether the existing base is adequate or needs correcting, and where digging is involved we locate underground services carefully and use detectors where appropriate — though no scan guarantees what's below, so we'd ask you to check any utility plans you have. Planning or permitted-development questions about a large garden building are your responsibility as the customer; we don't promise compliance status, and we'd encourage you to check with your council before delivery if you're unsure.

The survey and the quote

On the survey we look at access, ground, base, the kit and its delivery arrangements, and how the build will be staged. Then we quote the full project: what's included, what materials are needed, how many working days are realistic and what each stage involves. The first working day is planned as a substantial one — typically around eight hours of hands-on build time — but a large building is rarely finished in a day, so multi-day work is staged, and each stage is quoted and approved before it proceeds. Any parts or materials are quoted separately from labour.

How we build

The base is checked and corrected first, because everything above it inherits its errors. The floor is assembled dead level, the frame squared and braced, panels fixed per the manufacturer's specification, and the roof built and covered with the covering properly secured and finished at edges and trims. Doors and windows are hung, aligned and checked, hardware is fitted as specified, and finishing — seals, trims, felt edges — is done in dry conditions. Packaging and offcut disposal is agreed with you in advance. If we find problems mid-build — a base that's moved, a kit with missing parts, ground that's softer than the survey suggested — we stop and discuss rather than improvise.

Weather and honest limits

External construction is weather-dependent: roof coverings and sealing need dry conditions, and high winds stop roof work entirely, so we schedule sensibly and tell you plainly if weather must delay a stage. We don't guarantee against future settlement or weathering, and we can't promise the manufacturer's kit is complete or defect-free — we flag anything we find rather than build over it. What we do promise is an honest quote, a build done to specification and a conversation, not a surprise, whenever something changes.

Delivery coordination is part of what we plan at the survey. Large shed kits arrive on pallets and need somewhere dry, flat and accessible to sit between delivery and build — and it's worth confirming with the supplier that the delivery vehicle can reach your property, because a kit dropped at the kerb adds a lot of carrying. We'll talk through the practicalities at the survey so build day runs to plan.

Booking your project

Call or book through the website with the building's size and manufacturer, the base type and condition, your access situation and when the kit is being delivered. We'll arrange a survey, quote the project and agree a start date. You'll pay a booking fee when you book, labour is charged hourly at a rate that depends on how soon you need the visit, and the full project cost is quoted and approved before work starts, with parts quoted separately.