Blinds Fitted Square and Snug — Roller, Venetian, Roman and Day-Night in Coventry

What the service covers

Roller, Venetian, Roman, vertical, day-night and pleated blinds all fit the same way at heart: brackets, level, and a careful check of every measurement before drilling. What differs is the detail — roller blinds need the bracket spacing and roll direction right, Venetians need the headrail seated square so the slats tilt evenly, and Romans need the rail fixed true so the folds stack neatly. We fit the blind you have bought, to the window recess or the wall or ceiling above it, and we make sure it works smoothly before we leave.

Measurements and the check that saves the day

Blinds are made to measurements, and the most valuable thing we do is often confirming those measurements against the window before fitting. A blind made for a recess will not fit inside a recess with tiles or a handle in the way; a blind made for exact fitting needs clearance either side. We check the blind against the window, agree recess or exact fit, and agree the position — inside the recess, on the frame surround, or above the opening — before any fixing is made.

Then the material behind: plasterboard, masonry, the uPVC of a modern window surround, or tiles in a kitchen or bathroom. Each takes a different approach, and some take no approach at all — we generally avoid drilling into the window frame itself, where a slip can damage the sealed unit, preferring the recess face or the wall above. We plan around the usual routes of cables and pipes, and we do not make a hole we are not satisfied about.

Fitting and the safety details

Brackets are fixed level and square, the blind is seated, and we test the full action — lowering, raising, tilting where applicable — several times. Cord and chain safety matters in homes with children, and blinds supplied in the UK come with safety devices; we fit those devices as the maker specifies and set cords so they do not hang as a loop within a child's reach. That is part of the job, not an optional extra.

Motorised blinds raise one boundary: battery-powered ones we fit like any other, but anything needing mains wiring is electrical work we do not carry out — an electrician handles that, and we fit the blind around it.

Different rooms, different care

Kitchens and bathrooms need an extra pass of thought: steam and grease shorten the life of some fabrics, tiles and splashbacks change how and where brackets can be fixed, and there are more cables and pipes packed around sinks and hobs than anywhere else in the house. Bedrooms usually want blackout alignment — a blind that misses the frame edges by a centimetre each side leaks morning light down both sides. We take the room into account when agreeing the position, rather than fitting every blind the same way out of habit.

What to have ready

Have the blind and its box of fixings ready, with the maker's instructions to hand if they are available. Tell us the room, the blind type, and whether it is recess or exact fit when booking, and mention tiled or awkward walls. Clear the sill and the working area.

Aftercare

Operate the blind with its control, not the fabric — pulling a roller blind down by its bottom bar distorts the roll over time. Dust Venetian slats closed with a dry cloth or a blind duster, spot-clean fabric blinds rather than washing them, and check the cord or chain safety device is still secured after any cleaning spree. If a blind ever rolls unevenly, it is usually a bracket question, and small adjustments early stop it becoming permanent.

Booking

Tell us the blind type, the room, whether it is recess or exact fit, and your timescale; same-day may be available. You pay a booking fee when booking, the hourly labour rate depends on how soon you need the visit, and the full cost is quoted and approved before work starts. Any fixings needed beyond the blind's own hardware are identified and quoted separately.