Fridge Not Cooling? We Find The Cause And The Fix in Leamington Spa

What a warm fridge usually means

When a fridge stops cooling but the interior light still works, the fault sits somewhere between the settings, the cooling system and the air path. Some causes are simple: a dial knocked out of position, a door seal that has perished, or a freezer vent blocked by food so cold air cannot reach the fridge compartment. Others involve the components that actually drive cooling, such as the thermostat, the fan, or the compressor and its starting relay.

The important thing is not to assume the worst. Many no-cooling calls end with a repairable electrical or airflow fault rather than a dead cooling system.

What we check on the visit

The engineer starts with the basics: the temperature settings, the location of the appliance and the space around it, and whether the freezer compartment is frosting or the vents are blocked. We check that the door closes fully and that the seal grips evenly, because even a small gap makes the appliance run warm.

From there we move to the cooling circuit in safe terms: listening to whether the compressor starts and runs, checking the evaporator fan spins, and testing the thermostat and related electrical components. Where a fault points to the sealed refrigerant system itself, we explain exactly what that means, because sealed-system work is a specialist job we do not carry out and we will say so plainly rather than attempt it.

Moving perishables while you wait

If the fridge has been warm for more than a few hours, act on the contents. Move perishables such as meat, dairy and leftovers to a working fridge, a cool bag with ice packs, or a neighbour's appliance. Follow the storage and date guidance on the packaging rather than any fixed rule we could give here, and when in doubt about something high-risk like raw meat or seafood, it is safer to discard it.

Repair or replace

If the diagnosis is an electrical component, a fan motor, a thermostat or a seal, the fix is usually straightforward and we can quote it on the spot. Parts for fridges vary by brand and model, so if a specific component is needed we identify it and quote it separately; availability depends on the manufacturer.

If the compressor or the sealed system has failed, a repair can approach the cost of a new appliance on older models. We will give you the honest arithmetic with the model in front of us, including whether a replacement makes more financial sense, and we will not talk you into a repair we would not choose ourselves.

Safety points worth knowing

Do not run the appliance continuously if it is warm, humming oddly or tripping the electrics; switch it off at the socket if anything smells hot or burnt. Never open or tamper with the sealed pipework at the back of a fridge, and leave any capacitor-containing electronics to a competent engineer. Keep the area behind the appliance dust-free so air can circulate, but only clean it with the plug pulled out.

Booking your visit

Call or use our contact form and tell us the brand and model number, roughly when the cooling failed, and anything the fridge is doing — running constantly, silent, clicking, or tripping the electrics. If your food has already had to be moved, mention that so we can prioritise the visit. Where the fault needs a specific part, we arrange the follow-up around that order rather than leaving you waiting. You will know the price before the engineer picks up a screwdriver, and nothing proceeds without your approval.