Damaged Wiring in Electric Furniture? We'll Replace It Properly in Kenilworth
We trace the damaged cable, connector or supply lead, replace it with the correct part and re-route it clear of the mechanism so the same fault does not come back.
Booking fee plus hourly labour — the price is confirmed before any work starts.
What this costs
| Booked 14+ days ahead | £25 booking fee £85 per hour |
|---|---|
| Booked within 48 hours | £100 booking fee £65 per hour |
| Same-day call-out | £220 booking fee £45 per hour |
The booking fee secures the visit. Labour is then charged by the hour, so you only pay for the time the job actually takes.
Booking fee £25–£220
£25 + £85/hr booked 14+ days ahead, £100 + £65/hr inside 48 hours, £220 + £45/hr same day. Agreed before we arrive.
Covered under Electric Adjustable Furniture
Mobility & Accessibility › Electric Adjustable Furniture — one of 17 documented jobs in this section.
Same-day wiring issue in furniture
Urgent jobs can often be booked for today. Ask when you book and we will confirm the slot before you pay anything.
15 service areas
Birmingham, Coventry, Dorridge and 12 more across the West Midlands.
Furniture wiring fails in predictable places. Knowing them helps you describe the fault, and helps us arrive with the right parts.
Where Wiring Fails
- Where the lead leaves the frame. The point where a cable passes from a moving section to a fixed one takes constant flexing. Conductors break strand by strand inside intact insulation, which is why the fault is intermittent at first.
- Where cables cross frame edges. A cable routed over a metal edge with no grommet or clip will eventually chafe through. This is the most common cause of a dead section on an adjustable bed.
- Under the base. Cables lying on the floor get dragged, stood on, and soaked when a drink spills. Pet damage is common too.
- At connectors. Low-voltage plugs work loose with movement, and their pins corrode in damp air. A loose connector under load heats up.
- At the plug and fuse. Loose terminals in a plug, a wrongly rated fuse, or a lead pulled tight against a skirting board.
- Inside the control box. Water tracking down a cable into the box, or heat damage where a terminal has been loose.
Why It Matters Beyond the Fault
A damaged cable is not only a reason the furniture stopped. An exposed conductor in a mains lead is a shock risk; a loose connection generating heat is a fire risk; and a low-voltage cable that has been crushed can short and take out the control box along with it. Wiring faults deserve fixing, not taping up.
Taping a damaged mains lead, or twisting conductors together and covering them, is not a repair. Neither is fitting a longer lead of a smaller cross-section to reach a distant socket. Both create hazards that outlive the inconvenience they solve.
How We Approach It
We trace the circuit rather than replacing parts speculatively. That means following the lead from the plug through to the control box, checking continuity and insulation where the cable is suspect, then working through each low-voltage run to the motors. We look specifically at the flex points and frame crossings, because that is where the evidence usually is.
Where a cable is damaged, we replace it — with a lead of the correct rating and type, not the nearest thing in the van. Where a connector has corroded or worked loose, we replace the connector rather than squeezing the pins. Where the damage extends into the control box, the box is replaced.
Then we re-route. This is the part that prevents a repeat: cables clipped and grommeted so they cannot chafe, with enough slack at the flex point to move without tension, and kept clear of every part of the mechanism. A repair that leaves the cable in the same trap will fail again.
Working Safely Around the Mechanism
Never put hands, tools or a torch into a moving mechanism to look at a cable. Isolate the furniture at the wall first, and if a cable is visibly damaged or a connector is burnt, do not use the furniture at all until it is repaired. Do not attempt to re-route wiring yourself under a raised bed section; a section that drops without warning is a serious hazard.
If the furniture is holding someone in an awkward position and the wiring fault has stopped it, help them out safely — and call 999 if they are in pain or distress.
Cables and Extension Leads
If the furniture's lead will not reach its socket, the answer is a properly rated extension or a new socket, not a longer, thinner lead. Multi-way adaptors shared with heaters are a frequent cause of nuisance trips and warm plugs. We will tell you when the supply arrangement itself needs attention, and when that work belongs to an electrician rather than to us.
When the Wiring Is a Symptom
Occasionally damaged wiring is the result of something else: a frame that has dropped and is now crushing a cable, a mechanism that has come out of alignment, or a base that has been dragged across a floor. Fixing the cable without fixing the cause simply buys time. We check the frame and the mechanism as part of the job and say what we find.
Booking the Visit
Tell us what stops working and when — for example, only when the head section is raised — and whether you have seen any damage. That kind of detail usually points straight at the fault. The booking fee is paid when you book, labour is hourly at a rate depending on how soon you need us, and the full cost is quoted and approved before any work starts.
How the price works
We charge a booking fee to hold your slot, then an hourly rate for the work itself. The fee changes with how soon you need us; the hourly rate changes with the slot you choose. You approve the price before we start, so there is no surprise on the invoice.
Booked 14+ days ahead
£25 booking fee
then £85 per hour of labour
Best value. Book the slot now, pay the smallest booking fee.
Booked within 48 hours
£100 booking fee
then £65 per hour of labour
For jobs that can wait a day or two but not a fortnight.
Same-day call-out
£220 booking fee
then £45 per hour of labour
Urgent problems: standing water, no heat, no power, leaks.
Book the slot
Choose the window that suits you and pay the booking fee. That holds your place in the diary.
We diagnose on site
The engineer confirms the cause and tells you what the job involves and how long it should take.
You approve, we work
Nothing goes ahead until you agree the price. Labour is then charged per hour at your slot rate.
Wiring in a bed or recliner lives a hard life: it flexes every time the furniture moves, it passes over metal frame edges, and it sits exactly where a mechanism can pinch it. Damage is often invisible from above and only shows up as an intermittent fault, a blown fuse or a function that stops working when the furniture is in a particular position. Replacing the damaged section properly matters more than getting it working again quickly.
What our customers say about our mobility & accessibility service
4.5 out of 5 from 8 reviews
Proper job, no upselling
Turned up in the window they promised, walked me through the options (turns out the old fitting was seized and needed careful removal), then cracked on. Everything was tested before they left. No mess, no drama, no surprise on the bill.
Job: Loose or Faulty Brakes
Fine in the end
The problem is fixed, which is the main thing, and the engineer clearly knew what they were doing. It took a fair bit longer than the estimate on the phone and I had to ask twice for a breakdown of the hours.
Job: Stair Lift Service
Would use again
What I appreciated was being told what was actually wrong before anyone started. Sorted in under 70 minutes and the invoice matched the quote to the penny.
Job: Control Panel Fault
Book Wiring Issue in Furniture
Tell us what is happening and choose a slot. If you are not sure this is the right job, use the diagnosis panel — it narrows the problem down before you book.
- Booking fee confirmed up front
- Hourly labour, agreed before work starts
- Same-day slots for urgent problems
Questions people ask about wiring issue in furniture
Straight answers to the things customers ask most often before booking.
Can I tape up a damaged cable myself?
No. Tape over a damaged mains lead is not a repair, and it hides a shock and fire risk rather than removing it. The same applies to twisting conductors together. Unplug the furniture and have the cable replaced with one of the correct rating.
What will you check?
We trace the circuit from the plug through the control box and along each low-voltage run to the motors, checking continuity and insulation where a cable is suspect. We look especially at flex points and where cables cross frame edges, since that is where damage usually starts.
Is it safe to look under the bed for the cable?
Only with the furniture unplugged at the wall, and never with a raised section above you — a section that drops without warning is a serious hazard. If a cable is visibly damaged or a connector looks burnt, do not use the furniture at all until it has been repaired.
The fault only appears when the bed is raised — why?
That pattern points to a conductor that has broken inside its insulation at a flex point, so contact is made or lost depending on position. It is common where a cable passes from a moving section to a fixed one, and it is exactly the kind of fault that gets worse with use.
What does the work cost?
You pay a booking fee when you book, and the hourly labour rate depends on how soon you need the visit. After diagnosis we quote the full cost of the work and you approve it before we start. Replacement leads, connectors or a control box are quoted separately.
Need wiring issue in furniture sorted in Kenilworth?
Book a slot in the diary and pay only the booking fee up front. We confirm the rest before we start.