Large Wall Holes Made Good With a Proper Structural Patch in Kenilworth

When a hole in a wall stops being a ding and becomes an opening — an accident with furniture, a fittings removal that took half the wall with it, a chase for pipework that was never made good properly — the repair becomes a construction job in miniature. The hole needs cutting back to sound material, a patch that is actually supported, joints that are taped and filled, and honest drying time. Done well, the wall looks as though nothing happened. Done badly, it shows as a bulge, a crack outline or a patch that falls in within a year.

What kind of wall decides the method

Plasterboard walls (stud partitions, dot-and-dab board on masonry) are repaired by patching in a piece of matching board: the damaged area is cut back to a neat shape with sound edges, a matching piece of board is cut and fixed to the frame — or supported on battens behind the opening where no frame falls conveniently — and the seams are taped, filled and sanded smooth.

Solid masonry walls are repaired with plaster: loose and damaged material is raked back to a sound edge, the background is prepared, a base or bonding layer rebuilds the depth, and a finishing coat brings it flush. Each coat needs its own setting and drying time — a deep repair is a multi-stage job, and sometimes a multi-day one.

Assessment first, always

Before cutting, we confirm three things. What is behind the hole — frame members, voids, and the likely routes of cables and pipes, checked carefully rather than assumed, because no check guarantees nothing hidden. What the wall is made of and how thick the missing material is. And why the hole exists: if it follows a leak, pairs with damp, or sits in a wall showing cracks that suggest movement, the cause needs dealing with first — and we will stop and recommend a damp specialist or structural survey rather than patch over the problem. If older textured coatings are involved and we suspect they could contain asbestos, we will not disturb them; that needs a licensed specialist.

What a typical visit covers

The estimate is for the hole or holes described, repaired to a decorated-ready finish, in a contained area. Very large damaged areas, holes involving the ceiling, or repairs that need several drying stages across days may extend beyond a single visit — we explain the plan and timing before starting, and the full cost is agreed before any work begins. Board, battens, plaster and other materials are identified during assessment and quoted separately; they are not assumed to be included.

Finish, decoration and aftercare

A completed patch is flush, dry and sound — a surface ready for decoration, not a decorated wall. Even a well-finished patch can read slightly differently under fresh paint, so repainting the whole wall is usually the way to make it vanish; decorating is separate work we can quote if wanted. Keep the repair undisturbed while it cures, and avoid knocking the area while the patch is still young.

Booking

Tell us roughly the hole's size and what the wall is when you book, and send a photo if you can — it helps us bring the right materials. Same-day visits may be available for contained repairs. You pay a booking fee when booking, the hourly labour rate depends on how soon you need the visit, and the full cost is quoted and approved before work starts.

If the patch sits behind furniture, ease the furniture back gently rather than pushing it flush on the day, and give larger plaster repairs a few days before hanging anything on them. If fittings used to live in the repaired area, tell us — we can refit them with better fixings once the repair has cured.