TV Stands Built Sturdy Enough to Hold What's On Top in Edgbaston
We assemble media units from the manufacturer's instructions — glass seated correctly, shelves level, fixings tight — and check the stand's load rating against your screen.
Booking fee plus hourly labour — the price is confirmed before any work starts.
What this costs
| Booked 14+ days ahead | £25 booking fee £85 per hour |
|---|---|
| Booked within 48 hours | £100 booking fee £65 per hour |
| Same-day call-out | £220 booking fee £45 per hour |
The booking fee secures the visit. Labour is then charged by the hour, so you only pay for the time the job actually takes.
Booking fee £25–£220
£25 + £85/hr booked 14+ days ahead, £100 + £65/hr inside 48 hours, £220 + £45/hr same day. Agreed before we arrive.
Covered under Furniture Assembly
Handyman › Furniture Assembly — one of 20 documented jobs in this section.
Same-day TV Stand Assembly
Urgent jobs can often be booked for today. Ask when you book and we will confirm the slot before you pay anything.
15 service areas
Birmingham, Coventry, Dorridge and 12 more across the West Midlands.
The piece your television depends on
A TV stand is more than a table with shelves: it carries your most expensive and most fragile possession, hides the wiring that would otherwise sprawl across the wall, and sets the viewing height for the room. It is also a piece of furniture with glass panels, cam fittings and soft-close hinges that punish careless assembly. Built properly, it does all three jobs quietly for years; built casually, the first sign of trouble is a shelf bowing under a soundbar.
What the assembly involves
TV stands vary more than most furniture — low cabinets with drop-down or sliding doors, open frames with adjustable shelves, corner units, units on castors or with a swivel mount of their own. The build usually involves a carcass, tempered glass shelves or doors that must be seated in their cups and clamped just right, hardware that differs between wood, metal and glass parts, and cable routing holes that need their grommets fitted cleanly. We follow your unit's own instructions rather than treating them all alike.
Weight, glass and load ratings
This is where care matters. A television concentrates serious weight on the top surface, and every stand has a maximum load for the top and for the shelves — we check the rating against your screen's size and weight before the unit goes into service, and we will tell you honestly if the pairing looks wrong. Glass panels are handled with the respect they deserve, seated properly in their fittings and never overtightened, and shelves are set level so the weight spreads as designed. If a panel arrives cracked, we stop, assess what can reasonably be done and advise on manufacturer replacement parts rather than improvise with damaged glass.
Cables, corners and placement
The tidy part of the job: routing power, HDMI and aerial leads through the stand's cable ports so the unit can sit back near the wall without pinching anything. We do non-invasive cable management only — the ports the unit provides, clips or trunking — and we do not touch electrical wiring itself. Then the placement: level on the floor, stable, with breathing room for ventilation around any equipment inside the stand, because receivers and consoles need airflow more than people expect.
Planning the placement
Where the stand sits is worth deciding with a tape measure rather than an instinct: the screen should sit at eye level when you are seated, the unit needs breathing space for ventilation around anything running inside it, and it wants to be near the sockets and aerial point without stretching cables taut. Check it will not sit against a radiator, because heat and electronics do not mix. We will help you settle the position on site, level the unit to your floor and check it stands solid before the screen goes anywhere near it.
Planning the placement
Where the stand sits is worth deciding with a tape measure rather than an instinct: the screen should sit at eye level when you are seated, the unit needs breathing space for ventilation around anything running inside it, and it wants to be near the sockets and aerial point without stretching cables taut. Check it will not sit against a radiator, because heat and electronics do not mix. We will help you settle the position on site, level the unit to your floor and check it stands solid before the screen goes anywhere near it. If the unit is to carry a soundbar or consoles as well as the screen, say so — the shelves have their own limits, and it is better we plan for the real load than discover it later.
Booking the visit
Have the stand's cartons near the room, the screen's model number or weight to hand, and a rough idea where the unit will stand. If the unit is heavy or oversized, say so when booking — large units, like large screens, can be a two-person job. To arrange it, call Maintenance Men: a booking fee is paid when you book, labour is hourly and the rate depends on how soon you need the visit, and the full cost is quoted and agreed with you before any work starts. Same-day slots may be available, we are fully insured, and we cover the West Midlands.
How the price works
We charge a booking fee to hold your slot, then an hourly rate for the work itself. The fee changes with how soon you need us; the hourly rate changes with the slot you choose. You approve the price before we start, so there is no surprise on the invoice.
Booked 14+ days ahead
£25 booking fee
then £85 per hour of labour
Best value. Book the slot now, pay the smallest booking fee.
Booked within 48 hours
£100 booking fee
then £65 per hour of labour
For jobs that can wait a day or two but not a fortnight.
Same-day call-out
£220 booking fee
then £45 per hour of labour
Urgent problems: standing water, no heat, no power, leaks.
Book the slot
Choose the window that suits you and pay the booking fee. That holds your place in the diary.
We diagnose on site
The engineer confirms the cause and tells you what the job involves and how long it should take.
You approve, we work
Nothing goes ahead until you agree the price. Labour is then charged per hour at your slot rate.
A TV stand carries your most expensive and most fragile possession, so it is worth assembling properly: glass panels seated correctly, shelves level, fixings tight, and the top checked against the weight of your screen. We build media units from the manufacturer's instructions and route cables tidily through the ports the unit provides.
What our customers say about our handyman service
5 out of 5 from 8 reviews
Fast, tidy and friendly
Booked the £100 booking-fee slot on Saturday and got a message confirming the time the same morning. The cause was explained, the price agreed before any work started, and the job was done in about 77 minutes. Clean and tidy when they left.
Job: Heavy Picture Wall Mounting
Exactly what was quoted
Third time we have used Maintenance Men, and the same experience each time: agreed price, proper explanation, job done in one visit. The hourly rate is fair for the standard of work.
Job: Plaster Wall Repair
Worth the booking fee
Booked online, paid the booking fee, and the engineer rang ahead. Job done in about 43 minutes, plus straightforward advice on stopping it happening again. Will use them for the rest of the house now.
Job: Soundbar Installation
Book TV Stand Assembly
Tell us what is happening and choose a slot. If you are not sure this is the right job, use the diagnosis panel — it narrows the problem down before you book.
- Booking fee confirmed up front
- Hourly labour, agreed before work starts
- Same-day slots for urgent problems
Questions people ask about tv stand assembly
Straight answers to the things customers ask most often before booking.
Could I build a TV stand myself?
Many stands are straightforward, but the parts that catch people out are the glass panels, the soft-close hinges and the cable grommets, where a heavy hand causes damage. There is also the question of whether the stand's load rating suits your screen, which is easy to overlook. If you are confident, follow the instructions slowly; if any of that sounds familiar in a bad way, we will handle it.
What do you check before the stand goes into use?
We verify the parts against the manufacturer's list, seat the glass panels correctly in their fittings, and set every shelf level so weight spreads as designed. Then we compare the stand's stated load ratings with your screen's weight and size, and tell you honestly if the pairing looks marginal. Fixings are re-checked before we finish.
Can any TV stand hold a large screen like mine?
Not necessarily — every stand has a maximum load for the top surface and the shelves, and a large screen plus a soundbar and consoles can add up quickly. We check your screen's weight against the manufacturer's rating and will say plainly if the combination looks wrong, because a collapsed stand damages far more than the stand. Better to know before the screen goes on.
Can you also mount the TV on the wall instead?
Wall mounting is a separate service with its own survey, because it depends on the wall's construction, the bracket and the screen's weight — we would assess all of that before any drilling. If you would like both in one visit, mention it when booking and we will plan the time realistically. The customer normally supplies the compatible screen and bracket.
How is the cost of TV stand assembly worked out?
A booking fee is paid on booking, labour is charged hourly and the rate depends on how soon you need the visit, and the full cost is quoted for your approval before work starts. If the unit needs manufacturer replacement parts — a cracked glass panel, say — we identify them and they are quoted separately. No surprises after the fact.
Need tv stand assembly sorted in Edgbaston?
Book a slot in the diary and pay only the booking fee up front. We confirm the rest before we start.