Lint Filter Blockage: The Small Habit That Protects Your Dryer in Edgbaston

We clear the filter housing and check what the blockage has affected, from airflow to thermal protection and drum seals.

Booking fee plus hourly labour — the price is confirmed before any work starts.

See how the price works

What this costs

Booked 14+ days ahead£25 booking fee
£85 per hour
Booked within 48 hours£100 booking fee
£65 per hour
Same-day call-out£220 booking fee
£45 per hour

The booking fee secures the visit. Labour is then charged by the hour, so you only pay for the time the job actually takes.

Booking fee £25–£220

£25 + £85/hr booked 14+ days ahead, £100 + £65/hr inside 48 hours, £220 + £45/hr same day. Agreed before we arrive.

Covered under Tumble Dryer

Home Appliances › Tumble Dryer — one of 23 documented jobs in this section.

Same-day lint filter blockage

Urgent jobs can often be booked for today. Ask when you book and we will confirm the slot before you pay anything.

15 service areas

Birmingham, Coventry, Dorridge and 12 more across the West Midlands.

The lint filter sits in the air path for a reason. Every load sheds fibres, and the filter catches them before they reach the heater, the fan and the vent. When it is left to clog, airflow falls, the machine runs hotter and drying takes longer. Most blockages are cleared in seconds by the owner, which is why this is one of the few dryer jobs that is genuinely a DIY task. The complications arise when the blockage has been left long enough to cause secondary problems.

Clearing the filter correctly

Remove the filter before or after every load and pull the lint off with your fingers. Do not wash a felt-style filter unless the manufacturer says it can be washed; water can mat the fibres and reduce airflow. Check the filter housing and the slot it sits in, because lint packs into the corners and behind the frame. On condensing dryers, the condenser and its foam or mesh filter also need cleaning at the interval in the manual, and the water container needs emptying.

When a "blocked filter" is more than that

If the filter is clean and the machine still performs poorly, the restriction is elsewhere: behind the drum, in the fan housing, in the condenser, or along the vent. A filter that keeps clogging unusually quickly can indicate excessive lint production from over-drying, or a seal that is letting fibres bypass the filter. A filter housing that has warped or cracked will not seat properly and will pass lint regardless of cleaning.

What we check on the visit

We remove the filter and inspect the housing, the seal and the retaining clips. We check the air path behind the filter for accumulated lint, inspect the fan housing and blades, and confirm airflow at the vent or condenser outlet. Where a thermal cut-out has tripped, we test it and the thermostats, and we look for signs of heat damage around the heater. If the filter housing is distorted, we identify the replacement part.

The fire risk in plain terms

Lint caught in a filter is harmless while it stays cool and in place. Lint that bypasses a damaged filter and settles on a heater or around a fan can ignite. This is why manufacturers specify cleaning after every load and why a dryer should never be run with the filter removed. It is also why a burning smell or scorching around the filter area should stop the machine immediately, not be treated as a maintenance note.

Repairs that follow a long-term blockage

A blocked filter left for months can cause a thermal cut-out to fail, a thermostat to drift, a heater housing to distort or a drum seal to harden. Those are repairable, but the cost rises with each one. If the machine has been cutting out, tell us, because we will want to test the thermal protection rather than simply clearing the lint and leaving.

Keeping on top of it

Make filter cleaning part of the routine: empty it when you empty the drum, and check the housing weekly. Clean the condenser monthly on a condensing machine. Have the vent checked annually. Keep a note of how quickly the filter fills, because a sudden change can be the first sign of a seal or airflow problem.

Booking a check

Book a visit if the machine has overheated, cut out, or still dries poorly with a clean filter. Tell us the brand, model and dryer type, and what you have already cleaned. If you have noticed a burning smell at any point, say so, because that changes what we prioritise.

How the price works

We charge a booking fee to hold your slot, then an hourly rate for the work itself. The fee changes with how soon you need us; the hourly rate changes with the slot you choose. You approve the price before we start, so there is no surprise on the invoice.

Booked 14+ days ahead

£25 booking fee

then £85 per hour of labour

Best value. Book the slot now, pay the smallest booking fee.

Booked within 48 hours

£100 booking fee

then £65 per hour of labour

For jobs that can wait a day or two but not a fortnight.

Same-day call-out

£220 booking fee

then £45 per hour of labour

Urgent problems: standing water, no heat, no power, leaks.

1

Book the slot

Choose the window that suits you and pay the booking fee. That holds your place in the diary.

2

We diagnose on site

The engineer confirms the cause and tells you what the job involves and how long it should take.

3

You approve, we work

Nothing goes ahead until you agree the price. Labour is then charged per hour at your slot rate.

A clogged lint filter looks like a minor maintenance issue, and most of the time it is. But the filter is the first line of defence for airflow, and when it stays blocked the consequences spread: longer cycles, a hotter cabinet, tripped thermal cut-outs and, at the extreme, a fire. The visit clears the restriction properly and checks for knock-on effects.

What our customers say about our home appliances service

4.8 out of 5 from 14 reviews

Exactly what was quoted

What I appreciated was being told what was actually wrong before anyone started. Sorted in under 27 minutes and the invoice matched the quote to the penny.

Job: Tumble Dryer Not Starting Cycle

Good job, slightly late

Solid work. Hourly rate feels fair for the amount of work involved and everything was tested before they left. Would book again.

Job: Toaster Not Working

No mess left behind

Really straightforward. It had been bothering us for weeks; diagnosed properly, fixed the same visit, and the price was exactly what was explained when booking. Can not fault it.

Job: Microwave Button Repair

Book Lint Filter Blockage

Tell us what is happening and choose a slot. If you are not sure this is the right job, use the diagnosis panel — it narrows the problem down before you book.

  • Booking fee confirmed up front
  • Hourly labour, agreed before work starts
  • Same-day slots for urgent problems

Questions people ask about lint filter blockage

Straight answers to the things customers ask most often before booking.

Can I clear the lint filter myself?

Yes, and you should after every load. Pull the lint off by hand and check the housing corners. Only wash the filter if the manufacturer says it is washable, and never run the dryer without it fitted.

Why does my dryer still dry badly with a clean filter?

The restriction may be in the condenser, the fan housing, behind the drum or along the vent. A damaged filter seal can also let lint bypass the filter entirely. A visit will locate where the airflow is actually being lost.

What happens if I ignore a blocked filter?

Airflow drops, cycles lengthen, the cabinet runs hotter and thermal cut-outs can trip. In the worst case, lint reaching the heater or fan can ignite. A burning smell means stop using the machine straight away.

How often should the filter be cleaned?

After every load is the manufacturer's usual guidance, with the housing checked weekly and the condenser cleaned monthly on condensing models. Busy households and pet owners often need to check more frequently.

What will the visit cost?

A booking fee is paid when you book, and the hourly labour rate depends on how soon you need the visit. The full cost is quoted for your approval before work starts, with any parts identified and priced separately.

Need lint filter blockage sorted in Edgbaston?

Book a slot in the diary and pay only the booking fee up front. We confirm the rest before we start.