New Sensors Fitted Right, in the Right Places, First Time in Birmingham

Installing sensors looks simple — stick or screw a small device to a wall or frame and connect it. What separates an installation that lasts from one that generates call-outs for years is everything around that moment: choosing the right type of sensor for each position, mounting it at the right height and angle, fixing it to a surface that will hold it, and testing that it actually covers what it is meant to cover. Position affects performance more than any other single factor, and we will be honest with you about that throughout — including when a position you want is one that cannot work well.

Choosing the right sensor for each place

Different openings and rooms need different detection. Contact sensors — a switch and magnet pair — suit doors and windows, with the type and mounting varying by frame material and how the door or window moves. Passive infrared motion sensors suit rooms and circulation spaces, with coverage patterns, pet tolerance and mounting height all mattering; a sensor chosen for a hallway is not automatically right for a lounge with a cat. Glass-break detectors listen for the specific sound of breaking glass and belong where they can hear the windows they are meant to watch. Heat alarms belong over cookers and in garages, where smoke alarms would nuisance-trigger. Positioning has hard rules worth respecting: motion sensors work best facing across the likely path of movement rather than along it, away from windows, heat sources and draughts; contacts need their magnet within the manufacturer's specified gap; and every sensor needs a surface and fixing that will keep it exactly where it is put through years of door slams, decorating and family life.

How we install

We start with a survey of the home and the system it is joining: what panel or hub you have, what it accepts, where coverage is needed, and where the realistic mounting positions are. We discuss the plan with you before drilling anything — including which positions we would avoid and why, such as a motion sensor that would face a sunny window or a contact on a frame that cannot close true. Installation itself is done with fixings suited to the material: proper plugs and screws in masonry, the right approach on uPVC, and honest advice where a surface will not hold a sensor reliably. Wireless sensors are paired properly to the hub or panel, positioned with attention to range and obstructions, and batteries are fresh, not leftovers. Wired sensors are connected with the system safely isolated. Then we test every sensor with you — walk tests, door and window openings — until coverage is proven rather than assumed.

Limits and honest advice

No sensor detects everything in every condition, and we will say so: a motion sensor has a coverage pattern, a contact only watches its own opening, and a pet or a sunlit conservatory will challenge any hardware. If a position you have in mind cannot work well, we will say so and offer the realistic alternative rather than fit it and let you discover the limits later. Where installation is part of a larger project — a whole new system, for example — that is quoted after a survey, with parts quoted separately and the full cost approved before work starts.

Booking an installation

Call or use the website and tell us what you want protected, what system the sensors will join, and anything about the home that affects placement — pets, sun exposure, upcoming decorating. You pay a booking fee when you book, labour is charged hourly at a rate that depends on how soon you need the visit, and the full cost is quoted and approved before work starts, with any sensors and parts quoted separately.